Model：IDC-118

Characteristic：Solvent-based concentrated product, suitable for various elastomers

Scope of application：It is suitable for the release of various polyurethane elastomer release agents, including buffer blocks, rubber rollers, filters, sieve plates, solid tires, etc.

Model：RK-327

Characteristic：Solvent-based concentrated product, suitable for various elastomers

Scope of application：It is suitable for the release of various polyurethane elastomer release agents, including buffer blocks, rubber rollers, filters, sieve plates, solid tires, etc.

Performance advantage：

1. It can provide a release film with high-efficiency mold release performance.
2. Use by spraying with a spray gun, or brush with a brush, or wipe with a cloth.
3. It can keep the mould clean.
4. In most cases, one spray can be demoulded multiple times.
5. It is very effective for demoulding materials such as epoxy resin, melamine, methacrylate, polyester or polyurethane.
6. When this product forms a very thin film, it can achieve excellent results.
7. Before use, the surface of the mold must be cleaned up.
8. It is recommended to dilute it in aliphatic or halogenated solvents at 1:25-1:50.

Model：IDC-130PC

Characteristic：Solvent-based ready to use, suitable for various elastomers

Scope of application：It is suitable for the release of various polyurethane elastomer release agents, including buffer blocks, rubber rollers, filters, sieve plates, solid tires, etc.